6
Carton Inventory
If anything is missing, carefully check the packing material.
Preparation
Remote Control
Visor Clip
3-Button Premium
Remote Control
Model 893MAX (1)
myQ Remote LED Light
Model 827LM
(Garage Door Opener Light)
with Hardware Bag
Automatic Garage Door Lock Model 841LM
with 2-Conductor White and White/Black
Bell Wire with Connector
NOTE: Older model 24V door locks
are incompatible
2 Conductor Bell Wire
White and White/Red
Garage Door Opener
Mounting Bracket
Collar with
Set Screws
Safety Reversing Sensor Bracket (2)
The Protector System
(2) Safety Reversing Sensors
(1 Sending Sensor and
1 Receiving Sensor) with
2-Conductor White and
White/Black Bell Wire attached
Safety Labels
and Literature
Smart Control Panel
®
Model 880LMW
Battery Model 485LM
Screw #10-32 (2)
Screw 14-10x2" (2)
Handle
Rope
Screw 1/4"-20x1/2" (2)
Screw 6ABx1-1/4" (2)
Drywall Anchor (2)
Screw 6-32x1" (2)
Carriage Bolt 1/4"-20x1/2" (2)
Wing Nut 1/4"-20 (2)
REMOTE LIGHT HARDWARE:
myQ Remote LED Light Model 827LM
Drywall Anchor (Screw-In) (2)
Screw #6x1" (2)
HARDWARE
Additional Items You May Need
Extension brackets (Model 041A5281-1)
or wood blocks: Depending upon garage
construction, extension brackets or wood
blocks may be needed to install the safety
reversing sensor.
Fastening hardware: Alternate floor
mounting of the safety reversing sensor
will require hardware not provided.
90˚ connector for cable conduit or flex
cable adapter: Required for permanent
wiring.
INCLUDED ACCESSORIES
To Next Page
Loading...
