Level Percent Commands
DSPN Define 100% Point
Input: DSPN XXX.X
Returned: No response
Comments: Used to set the 100% level setting in inches or millimeters.
DSPN? 100% Point Query
Input: DSPN?
Returned: XXX.X
Comments: Used to query the 100% level setting.
PCNT? Current Percent Query
Input: PCNT?
Returned: XXX.X
Comments: Used to query the current percent level reading.
DZER Define 0% Point
Input: DZER XXX.X
Returned: No response
Comments: Used to set the 0% level setting in inches or millimeters.
DZER? 0% Point Query
Input: DZER?
Returned: XXX.X
Comments: Used to query the 0% level setting.
Event Log Commands
CLEVLG Clear the Event Log
Input: CLEVLG
Returned: No response
Comments: Used to clear all data from the event log. Data will be permanently
lost when the event log is cleared.
DATE Set the Date
Input: mm/dd/yy
Returned: No response
Comments: Used to set the current date in the format: mm/dd/yy
(month/day/year).
DATE? Date Query
Input: DATE?
Returned: mm/dd/yy
Comments: Used to query the current date.
EVENT? Last Event Query
Input: EVENT?
Returned: XXXXX, MM/DD/YY, HH:MM, XXX.X, XXX.X, XXX.X, XXX.X
Comments: String returned: Date, Time, TempA, Temp B, LN2 Level, Liquid
Usage, Event Codes
EVNCT? Event Log Count Query
Input: EVNCT?
Returned: XXXXX
Comments: Used to query the number of event log records.
To Next Page
Loading...
