Chattanooga Continuum - Parameter Defaults and Settings

EN
23
After scrolling through the data, the clinician can choose
to erase (reset) the data for future collection of compliance
data. Compliance Data is captured in  minute increments
when the unit is producing output waveforms. When
the Clinician needs to reset this compliance data due to a
new patient, follow the following steps:
. Press the ON button to turn on the device.
. Once the main Options menu is displayed, choose
“CONFIG” option.
. Choose the CLEAR option.
. To clear Compliance data, select “DATA” option.
. Press the Home button.
Resetting Parameter Defaults
The Chattanooga Continuum has the ability to modify
treatment parameters prior to treatment application. This
allows the clinician to tailor treatment to the individual
patient. When the clinician needs to reset this data due to
a new patient, the following steps are to be applied:
. Press the ON button to turn on the device.
. Once the main Options menu is displayed, choose
“CONFIG” option.
. Choose the “CLEAR” option.
. To reset the waveform data to parameter default values,
select the “PARAMETER” option.
Choosing a Language
The Chattanooga Continuum has the ability to modify the
language displayed upon the LCD screen. The options are
English (Default), French, Spanish and German. When the
clinician needs to alter the currently displayed language,
the following steps are to be applied:
. Press the ON button to turn on the device.
. Once the main Options menu is displayed, choose
“CONFIG” option.
. Choose the “SETTINGS” option.
. Use the lower left soft key to scroll to the “Languages”
option.
. Use the right side soft keys to scroll to the proper
language.
. Press the OK button to select the language.
. Press the Home button.
Changing the Contrast
The Chattanooga Continuum has the ability to modify the
contrast setting of the LCD screen to immediately fit the
needs of the patient or the clinician. When the clinician
needs to alter the contrast of the unit, the following steps
are to be applied:
. Press the ON button to turn on the device.
. Once the main Options menu is displayed, choose
“CONFIG” option.
. Choose the “SETTINGS” option.
. Use the right side soft keys to scroll to the “Contrast”
setting to where it needs to be.