PATIENT PREPARATION
35
Intelect® Advanced Therapy System
• Examine the skin for any wounds and clean the skin.
• Apply the electrodes to the treatment area.
• Ensure the electrodes are applied securely to the skin.
• Ensure good contact between each electrode and the skin.
• Check the electrode contact regularly during the treatment.
• Examine the skin again after the treatment.
• Choose electrodes that fit the anatomy.
• View the Electrode Placement recommendations in the
Treatment Review screen for the particular modality being used
for treatment as a reference point only prior to administering
treatment.
• Refer to the respective electrode type instructions on pages 37
through 38.
• Follow electrode manufacturer instructions.
ELECTROTHERAPY PATIENT PREPARATION
Electrode Placement
• Keep electrodes separated during treatment. Electrodes in contact with
each other could result in improper stimulation or skin burns.
• Output current density is related to electrode size. Improper
application may result in patient injury. If any question arises as to
the proper electrode size, consult a licensed practitioner prior to
therapy session.
• Powered muscle stimulators should be used only with the leads
and electrodes recommended for use by the manufacturer.
To Next Page
Loading...
