Chattanooga Intelect Advanced 2765CS - Viewing Electrode Placement for User Protocols; Preparing Patient for User Protocol Treatment; Editing Modality Parameters in User Protocols

Intelect® Advanced Therapy System
76
OPERATION
Give Patient Interrupt Switch to patient
and explain that pressing the Red button
once pauses the therapy session.
Set intensity by rotating the Intensity Control
Knob to the prescribed level.
Set Modality Intensity
PRESSING BUTTON ONCE PAUSES SESSION
INTENSITY
DISPLAYED
ROTATE
INTENSITY
KNOB
Clockwise- Increases Intensity
Counterclockwise- Decreases Intensity
Intensity Knob Rotation
If Patient Interrupt Switch is depressed, the
treatment will be paused and a message
will appear on the System screen.
Press any button to clear the message.
NOTE:
If the Patient Interrupt Switch is depressed
a second time, the message will clear from
the screen and the treatment will remain
paused.
Make certain the Patient Interrupt Switch,
for the channel(s) being used, is connected
to the Therapy System. Refer to page 13 for
Symbol Definitions.
NOTE:
When reinstalling the Front Access Panel,
make certain the Lanyard does not become
kinked.
Patient Interrupt Switch
LANYARD
PATIENT
INTERRUPT
SWITCH
CLINICAL RESOURCES LIBRARY- CLINICAL PROTOCOLS™ (continued)