CHCNAV AlphaAir 450 - Flow2-Pretreatment; Pretreatment

Data preprocessing in Copre
CHCNAV ALPHAAIR-450 USER MANUAL | 2021-10 P a g e | 44
▪ In Cloud point view you can set point cloud rendering
Figure 36
7.5 Flow2-Pretreatment
7.5.1 Pretreatment
▪ Right-click the project file, and the TAB appears. Then left-click Pretreatment
▪ Refer to chapter 7.4 Solve to result for parameter Settings
Figure 37