Configuring through a web browser
36
b) Manual Input: Manually input the coordinate of a control point.
c) From CORS: After the receiver logging in CORS, the software can record the
coordinate of current position based on fix solution.
For Sample for Average:
Users can determine the positioning limit and sampling amount. The positioning limit
falls into two types:
a) Single Solution Coordinates: Collect the coordinates of receiver obtained
through autonomous positioning.
b) Fixed Solution Coordinates: Only collect coordinates of receiver with a fixed
solution.
After the configuration of positioning limit and sampling amount, click to
carry out sampling and averaging → the progress bar will show the progress → the
result will be served as the coordinate of current positon.
If users need to save the changes, please tap button.
5.3.4 Receiver Reset submenu
Use this screen to completely or partially reset the receiver:
5.3.5 Languages submenu
Use this screen to select the web interface language:
To Next Page
Loading...
