Configuring Through a Web Browser
CHCNAV i90 GNSS USER GUIDE | 2019-9 P a g e | 42
6. Initialization is required:
▪ when the RTK is turned on every time;
▪ when IMU module is turned on every time;
▪ when receiver drops at working;
▪ when the pole is tilted more than 65 degree;
▪ when the receiver is stationary more than 10 minutes;
▪ when the RTK rotates too fast on the matching pole (2 rounds per second);
▪ when the pole hit the ground toughly.
5 Configuring Through a Web Browser
Supported browsers:
• Google Chrome
• Microsoft Internet Explorer
○
R
version 10, or higher
To connect to the receiver through a web browser:
1. Turn on the Wi-Fi of the receiver.
2. Search the wireless network named as GNSS-XXXXXXX (the SN of your receiver) on your
computer, and then establish the connection.
3. After the successful connection between your computer and the receiver, enter the IP
address (192.168.1.1) of the receiver into the address bar of the web browser on your
computer:
4. The web browser prompts you to enter a login account and password:
To Next Page
Loading...
