30
CLOSING FORCE ADJUSTMENT
(Only motors with mechanical limit switches)
SUPER-SENSITIVITY OBSTACLE DETECTION MANAGEMENT
DURING DOWNWARDS MOVEMENTS
(Only motors with mechanical limit switches)
This system ensures, when used it with box awnings,
that the awning remains completely closed, without
the awning fabric undergoing excessive stress from
pulling.
The control unit has been set in the factory to a
predetermined closing force setting, equal to 40%
of the rated torque. With the remote control it is
possible to change this setting, reducing it to 20%, or
increasing it to 70%, depending on the desired result.
Where required,
it is possible to activate/deactivate a high level of obstacle detection
sensitivity during downwards movement.
ACTIVATING THE SUPER-SENSITIVITY FUNCTION
DEACTIVATING THE SUPER-SENSITIVITY FUNCTION
70%
40%
20%
2 sec
+
B C
A
A
C
B
2 sec
+
B C
+
B C
A
2 sec
+
B C
A
+
A B
ENGLISH
To Next Page
Loading...