35
ANEMOMETERS
WINDTEC - Ref. A520007
WINDTEC LUX - Ref. A520008
Sun-sensor
tuning
Set button
Wind-speed
tuning
set
SETTING
To associate the sensor to the control unit, a remote control must be already memorised.
The setting sequence is the following:
DELETING
To delete the sensor from the control unit, an already programmed remote control must
be used. The deleting sequence is the following:
RUGIADA (TX RAIN-SENSOR)
Power Supply 230 Vac
Sensor element
Set button
set
RUGIADA - Ref. A520016
COMPATIBLE DEVICES
2 sec
set
+
A B
B
2 sec
set
+
A B
A
ENGLISH
To Next Page
Loading...