36
It detects movements caused by the wind on the awning arms.
MISTRAL SENSOR
SETTING THE SENSOR
DELETING THE SENSOR
SELECTOR
LED
SET BUTTON
0
To associate the sensor to the control unit, a remote control must be already memorized.
Set the selector to the 0 position and then perform this sequence:
To delete the sensor from the control unit, an already programmed remote control must
be used. Set the
selector
to the 0 position; if active wait for the sensor to go off and then
perform this sequence:
For the complete description of the functions of this device see the instruction booklet
that came in the box.
MISTRAL- Ref. A520012
ENABLE / DISABLE THE SUN SENSOR
(WindTec Lux)
To enable (automatically) or disable (manually) the sun sensor refer to the instruction
manual provided with the sensor or the remote control you want to use.
2 sec
set
+
A B
B
2 sec
set
+
A B
A
ENGLISH
To Next Page
Loading...