CHERUBINI TDS COMPACT - Function Open;Close Programming (Skipper Plus;Lux;P-Lux); Checking Function Status; Enabling Programming; Disabling Programming

26
FUNCTION OPEN/CLOSE PROGRAMMING
REMOTE CONTROL SKIPPER PLUS - SKIPPER LUX - SKIPPER P-LUX
To prevent accidental changes to the programming of the motor during the daily use of
the remote control, the possibility of programming is disabled automatically 8 hours after
sending the last sequence (A+B or B+C).
CHECKING THE STATUS OF THE FUNCTION
To change the status of the function, see the sequences “ENABLE/DISABLE
PROGRAMMING”
Proceed with programming as the instructions booklet
ENABLE PROGRAMMING
DISABLE PROGRAMMING
C
Open
or after
30 sec.
Remove and replace a battery
OPTION 2
OPTION 1
+ +
A
B
C
Tn
B
+ +
A
B
C
Tn
or after
30 sec.
B
Open
programming
Closed
programming
3 sec
+ +
A
B
C
Tn
or after
30 sec.
B
A
3 sec
Closed
3 sec
ENGLISH