Chicco KEYFIT - UAS REMOVAL AND STORAGE PROCEDURES; Removing UAS from Vehicle; Storing UAS Components Safely

14
15
UAS REMOVAL & STORAGE
Removing UAS
Pull UAS Connectors out of storage
pockets while lifting up on UAS Release
Lever.
Storing UAS:
1
Insert UAS Connectors into storage
pockets.
2
Pull UAS Pull Strap to secure UAS
Connectors.
3
Roll UAS Pull Strap and store in Pull
Strap Storage Pocket.
This Infant restraint system can be safely installed using vehicle
belts or UAS. UAS is a Infant restraint system attachment
system that is standard in most vehicles manufactured
after September 1, 2002. Refer to your vehicle owner’s
manual for details regarding UAS use in your vehicle.
When not using UAS, the UAS Connectors and Pull Strap MUST be
stored properly to allow Carrier to attach securely to Base.
1
2
3