39
Removing the Seat Pad
Remove Harness Straps from Harness
Slots as described in “Changing Harness
Height.”
1
Unhook elastic band attached around
handle pivots, and disconnect chest clip
and buckle.
2
Carefully pull seat pad from under
Adjuster Cover.
ADJUSTER COVER
MUST REMAIN IN PLACE
. Guide harness
assembly through slots in bottom of seat
pad, while removing from Carrier.
Installing the Seat Pad
Reverse the removal instructions to
reinstall the Seat Pad.
Carefully follow instructions in
“Changing Harness Height” to ensure
the harness is properly routed and
adjusted.
CLEANING & MAINTENANCE
Fabrics may be spot-cleaned with mild soap and water, or machine washed
in cold water on delicate cycle using mild detergent. Hang to dry. DO NOT
USE BLEACH.
1
2
3
NEVER use Carrier without
the Seat Pad.
5
To Next Page
Loading...
