This Infant restraint system can be securely installed
in most vehicles using the vehicle seat belts or UAS.
BUT, there are some vehicle belts and installation
positions that are UNSAFE for use with this infant
restraint system.
UNSAFE Vehicle Belts
The following types of vehicle belts MUST NOT be
used to install this Infant restraint system:
1
Motorized (automatic) vehicle belts.
2
Door mounted vehicle belts.
3
Lap/Shoulder Belts with 2 retractors,
(unless Lap Belt has a “Lock Mode”).
1 retractor tensions the Lap Belt and
1 tensions the Shoulder Belt.
4
Non-Locking (ELR) Lap Belts.
(Emergency Locking Retractors)
These belts remain loose after
installation and only lock during
a sudden stop or crash.
VEHICLE INFORMATION
Refer to your Vehicle Owner’s Manual for
detailed information about vehicle belts,
UAS, and preferred Infant restraint system
installation positions.
1
2
3
4
To Next Page
Loading...
