Uninstalling Base
Remove Carrier from Base
1
Loosen UAS by lifting the UAS
Release Lever and pulling Base away from
vehicle seat back.
2
Detach UAS Connectors by pressing
the red button on each UAS Connector,
and remove Base from vehicle.
Storing UAS
Insert UAS Connectors into storage
pockets.
a
1
Pull UAS Pull Strap to secure UAS
Connectors.
2
Roll UAS Pull Strap and store in Pull
Strap Storage Pocket.
NEVER travel with Infant restraint system unsecured in vehicle. Passengers
may be injured during a sudden stop or crash.
When not using UAS, the UAS Connectors and Pull Strap MUST be stored
properly.
1
2
1
a
2
a
INSTALLATION USING UAS
To Next Page
Loading...
