21
Use Newborn Insert to provide additional
support and ensure a secure harness t for
smaller infants.
To Install Insert in Carrier
1
Pull End of Buckle through center slot
in insert.
2
Pull Both Harness Straps over and
around side panels. Push insert rmly into
bottom of Carrier.
3
When properly installed, the Newborn
Insert and harness should look like
drawing.
1
ONLY USE Insert with infants who weigh between 2 and 5 kg (4 and 11 lbs)
NEVER USE Insert if infant weighs more than 5 kg (11 lbs)!
2
3
NEWBORN INSERT
The harness height may have to be
changed to t your infant. Before using
insert, read the instructions on “Changing
Harness Height” and “Securing Infant
in Carrier”
Top of insert should always be
BELOW the lower harness slots.
To Next Page
Loading...
