Chiptech GO - GO Specifications

32
DESIGN | MANUFACTURE | SUPPORT
GO Specifications
24.1 Compliance
GO1 mPERS
• AS/CA S042.1:2015 (General).
• AS/CA S042.4:2015.
• AS/NZS 60950.1:2015.
• AS/NZS CISPR 32:2015 (ITE, Class B).
• AS/NZS 4268:2014 (869.2125MHz and 916.585MHz).
• EN 62209-2 (Body SAR).
• PERS TSANZ compliant.
• ROHS compliant.
• CE compliant.
Wireless Charger:
• AS/NZS CISPR 11:2011 (Group 1, Class B)
• AS/NZS 60950.1:2015. IEC 62133.
• ROHS compliant.
• CE compliant.
• Qi compliant.
Plug pack:
• AS/NZS 60950.1:2011 Inc A1.
• CE compliant.
RFID tag:
• ISO/IEC 15693-2, ISO/IEC 15693-3, ISO/IEC 18000-3, NFC Tag Type 2.
24.2 Hardware
• Battery Capacity: 300mA.
• Battery maximum continuous discharge current: 600mA.
• Charge Current Maximum: 200mA (0.7c).
• Speaker power: 1W peak.
• MCU flash size: 256KB.
• Telit flash size: 2MB.
• External flash chip size: 4MB.
• 3G antenna tuning: 850 or 900MHz and 2100Mhz.
• GPS antenna tuning: 1574.42MHz.
• Pearl RF antenna tuning: 869.2125MHz, 916.585MHz.
• Uses a Nano SIM card.
• Fitted with vibrating motor, accelerometer and RFID chip.
24.3 Environmental
• GO is dust and water resistant, with a rating of IP67.
(i.e. immersed underwater down to 1.0m for up to 30 minutes).
• Hot water resistant up to a temperature of 60°C.