EasyManua.ls Logo

Chiptech GO - Page 5

Chiptech GO
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIALISTS IN DIGITAL TELECARE
5
chiptech.co.nz
1.2 Attachment Methods
1.3 Voice Messages and Sounds
GO is designed to provide its voice messages only during day time hours, so it is not
disturbing the user at night.
If an alert for help is sent during the night, GO will operate as per usual with the pre-alarm
sequence and voice messages.
If the battery is detected as being low at night, it will flash orange and vibrate periodically,
but not make any sounds.
If GO beeps continually this indicates it is not functioning as expected, and the user should
contact the provider immediately.
Important Note:
Wearing GO with a pacemaker - If the user has a pacemaker, they cannot wear GO as a
pendant. Instead, attach GO to the supplied split ring, which can be attached to a belt clip or
keys. GO must be kept at a minimum distance of at least 25cm from their pacemaker at all
times.

Other manuals for Chiptech GO

Related product manuals