Chison SonoEye P2 - Functional Description of Parameter Adjustment

Digital Color Doppler Palm Ultrasound System
33
5.1.11 SuperNeedle
SuperNeedle is to balance the B mode image. Select SuperNeedle, the user can optimize image by
adjusting angles.
5.1.12 SonoRemote
SonoRemote enables remote real-time ultrasound diagnosis.
Install SonoRemote on PC and open it, check the network connection. The SonoRemote will register an ID
automatically when you first log in to it. After registration, each time you open it, SonoRemote will log in your
account automatically.
Check the network connection on system, click SonoRemote icon to open it. The SonoRemote will register
an ID automatically when you first log in to it. After registration, each time you open it, SonoRemote will log
in your account automatically.
Input the ID of answer terminal on originate and start a call. System will receive the signal and connect with
originate terminal. If the connection is successful, the camera on the original terminal will automatically turn
on. The ultrasound screen and camera screen will be displayed on the PC. Before connecting, users can set
up video, microphone and speakers on the original terminal. The video data on the originate terminal will be
displayed on the answering terminal. Before connecting, the user can set the video, microphone and
speaker on the answering terminal.
Note: When the network connection of either originate or answer is disconnected automatically, it will
be automatically reconnected.
5.2 Functional Description of Parameter Adjustment
1. Gain
To adjust the Gain:
Swipe left, right in arbitrary place of screen.
Press the Gain button and slide the block to adjust the Gain.
2. Depth
To adjust the Depth:
Swipe up and down in the image area to adjust the depth.
3. Frequency
Click to choose Frequency. The range of the frequency depends on different probes.
4. Focus position
Press and hold the target position of the ruler, the focus will automatically jump to the position.
5. Zoom
Touch the screen with two fingers and slide it outward to adjust the zoom position.