KEYLESS ENTER-N-GO
The Keyless Enter-N-Go system is an enhancement to the vehicle's Key Fob. This feature allows
you to lock and unlock the vehicle's door(s) and trunk without having to push the Key Fob LOCK
or UNLOCK buttons, as well as starting and stopping the vehicle with the push of a button.
To Unlock From The Driver Side:
With a valid Keyless Enter-N-Go KeyFob located outside the vehicle and within 5 ft (1.5 m) of the
driver door handle, grab the driver door handle to unlock the drivers door automatically.
NOTE:
Refer to “Uconnect Settings” in “Understand-
ing Your Instrument Panel” in your vehicle's
Owner's Manual on the DVD or “Program-
mable Features” in this guide for further addi-
tional programming information.
To Enter The Trunk:
With a valid Passive Entry RKE transmitter within 3 ft (1.0 m) of the decklid, push the button
located on the light bar between the license plate lamps.
NOTE:
If you inadvertently leave your vehicle's Passive Entry RKE transmitter in the trunk and try to close
the decklid, the decklid will automatically unlatch, unless another one of the vehicle’s Passive
Entry RKE transmitters is outside the vehicle and within 3 ft (1.0 m) of the decklid.
Please refer to “Trunk Lock and Release” in “Things To Know Before Starting” located in your
Owner's Manual on the DVD for further information.
Grab The Door Handle To Unlock
GETTING STARTED
12
To Next Page
Loading...
