EasyManua.ls Logo

Chrysler 200c 2016 - To Lock the Vehicle

Chrysler 200c 2016
220 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To Lock The Vehicle:
The driver front door handle has the LOCK button located on the outside of the handle. With
one of the vehicle’s Keyless Enter-N-Go Key Fobs located outside the vehicle and within 5 ft
(1.5m) of the driver's front door handle, push the door handle LOCK button to lock all four doors
and decklid.
Do NOT grab the door handle, when pushing the door handle lock button. This could unlock the
door(s).
NOTE:
If 1st Press of Key Fob Unlocks All Doors” is programmed, all doors will unlock when you grab
hold of the driver front door handle. To select between “1st Press of Key Fob Unlocks All
Doors” and “1st Press of Key Fob Unlocks Driver Door,” refer to the “Uconnect Settings” in
“Understanding Your Instrument Panel” in your vehicle’s Owner's Manual on the DVD or
“Programmable Features” in this guide for further information.
If “1st Press of Key Fob Unlocks All Doors” is programmed, all doors and decklid will unlock
when you push the decklid button. If “1st Press of Key Fob Unlocks Driver Door” is pro-
grammed, only the decklid will unlock when you push the decklid button. To select between
“1st Press of Key Fob Unlocks All Doors” and “1st Press of Key Fob Unlocks Driver Door,” refer
to the “Uconnect Settings” in “Understanding Your Instrument Panel” in your vehicle’s Own-
er's Manual on the DVD or “Programmable Features” in this guide for further information.
After pushing the Keyless Enter-N-Go LOCK button, you must wait two seconds before you
can lock or unlock the vehicle using the door handle. This is done to allow you to check if the
vehicle is locked by pulling the door handle, without the vehicle reacting and unlocking.
Push The Button To Lock Do NOT Grab The Handle When Locking
GETTING STARTED
13

Table of Contents

Related product manuals