EasyManua.ls Logo

Chrysler 200c 2016 - Preparations for Jump-Start

Chrysler 200c 2016
220 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Preparations For Jump-Start
The battery in your vehicle is located in the front of the engine compartment, behind the left
headlight assembly.
WARNING!
Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime
the ignition switch is ON. You can be injured by moving fan blades.
Remove any metal jewelry such as rings, watch bands and bracelets that could make an
inadvertent electrical contact. You could be seriously injured.
Batteries contain sulfuric acid that can burn your skin or eyes and generate hydrogen gas
which is flammable and explosive. Keep open flames or sparks away from the battery.
1. Set the parking brake, shift the automatic transmission into PARK and turn the ignition to
LOCK.
2. Turn off the heater, radio, and all unnecessary electrical accessories.
3. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables
reach, set the parking brake and make sure the ignition is OFF.
WARNING!
Do not allow vehicles to touch each other as this could establish a ground connection and
personal injury could result.
Battery Posts
1 Positive Battery Post
2 Negative Battery Post
WHAT TO DO IN EMERGENCIES
172

Table of Contents

Related product manuals