2. Select the desired memory profile 1 or 2.
3. Push and release the SET button on the memory switch, then within five seconds push and
release the button labeled 1 or 2 accordingly. “Memory Profile Set” (1 or 2) will display in the
EVIC/DID.
4. Push and release the LOCK button on the RKE transmitter within 10 seconds.
Easy Entry/Exit Feature
The memory seat has an Easy Entry/Exit feature. This feature provides automatic driver seat
positioning to enhance driver mobility when entering and exiting the vehicle.
NOTE:
The Easy Entry/Exit feature is not enabled when the vehicle is delivered from the factory. The
Easy Entry/Exit feature is enabled (or later disabled) through the programmable features in the
Uconnect system. Refer to “Uconnect Settings ” in “Understanding Your Instrument Panel” in the
Owner's Manual on the DVD for further details.
Manual Seat Ad justments
Manual Front Seat Forward/Rearward Adjustment
On models equipped with manual seats, the adjusting bar is located at the front of the seats, near
the floor.
While sitting in the seat, lift up on the bar and
move the seat forward or rearward. Release the
bar once you have reached the desired posi-
tion. Then, using body pressure, move forward
and rearward on the seat to be sure that the
seat adjusters have latched.
WARNING!
• Adjusting a seat while driving may be dangerous. Moving a seat while driving could result
in loss of control which could cause a collision and serious injury or death.
• Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
Serious injury or death could result from a poorly adjusted seat belt.
Manual Seat Levers
1 — Adjusting Bar
2 — Height Adjustment
3 — Recliner Lever
GETTING STARTED
33
To Next Page
Loading...
