EasyManua.ls Logo

Chrysler 200c 2016 - Turn Signal;High Beam Lever; Headlight Switch

Chrysler 200c 2016
220 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TURN SIGNAL /HIGH BEAM LEVER
Turn Signals/Lane Change Assist
Tap the lever up or down once and the turn
signal (right or left) will flash three times and
automatically turn off.
Flash To Pass
Pull the lever toward you to activate the high
beams. The high beams will remain on until the
lever is released.
High Beam Operation
Push the lever forward to activate the high
beams.
NOTE:
For safe driving, turn off the high beams when
oncoming traffic is present to prevent head-
light glare and as a courtesy to other motorists.
HEADLIGHT SWITCH
Automatic Headlights/Parking
Lights/Headlights
The headlight switch is located on the instru-
ment panel to the left of the steering wheel.
Rotate the headlight switch to the first de-
tent
for parking lights and to the second
detent
for headlights.
With the parking lights or low beam head-
lights on, push in the center of the headlight
switch once for fog lights.
Rotate the headlight switch to the third de-
tent AUTO for automatic headlights.
When set to AUTO, the system automatically
turns the headlights on or off based on ambient
light levels.
Turn Signal/High Beam Lever
1 High Beam (Push Forward)
2 Flash To Pass (Pull Toward Driver)
Headlight Switch
1 Rotate Headlight
2 Push Fog
3 Ambient Light Dimmer
4 Instrument Panel Dimmer
OPERATING YOUR VEHICLE
39

Table of Contents

Related product manuals