Passive Speed Limiter
White Telltale
Light
What It Means
Passive Speed Limiter
The indication light up white along with a notification text message (speed warning set to xx fol-
lowed by unit). When the set speed is just exceeded, a single chime will sound along with pop
up message of speed warning exceeded. When the set speed is exceeded by 2 mph (3 km/h) or
more, the indication will light up yellow and flash along with a continuous chime (up to 10 sec-
onds or until the speed is no longer exceeded).
NOTE: The number “31” is only an example of a speed that can be select.
ONBOARD DIAGNOSTIC SYSTEM — OBD II
Your vehicle is equipped with a sophisticated Onboard
Diagnostic system called OBD II. This system monitors the
performance of the emissions, engine, and automatic trans-
mission control systems. When these systems are operating
properly, your vehicle will provide excellent performance
and fuel economy, as well as emissions well within current
government regulations.
If any of these systems require service, the OBD II system
will turn on the Malfunction Indicator Light (MIL). It will
also store diagnostic codes and other information to assist
your service technician in making repairs. Although your
vehicle will usually be drivable and not need towing, see
your authorized dealer for service as soon as possible.
CAUTION!
• Prolonged driving with the MIL on could cause
further damage to the emission control system. It
could also affect fuel economy and driveability. The
vehicle must be serviced before any emissions tests
can be performed.
• If the MIL is flashing while the vehicle is running,
severe catalytic converter damage and power loss
will soon occur. Immediate service is required.
222 GETTING TO KNOW YOUR INSTRUMENT PANEL
To Next Page
Loading...
