Headphones Operation
The headphones receive two separate channels of audio
using an infrared transmitter from the video screens.
If no audio is heard after increasing the volume control,
verify that the screen is turned on, the channel is not
muted, the headphones are on, and that the headphone
channel selector button is on the desired channel. The
channel selector button switches between the audio of
screen 1 and screen 2. If audio is still not heard, check that
two new AAA type batteries are installed in the head-
phones.
The headphone power indicator and controls are located
on the right ear cup.
NOTE: Uconnect Theater must be turned on before sound
can be heard from the headphones. To conserve battery life,
the headphones will automatically turn off approximately
three minutes after the Uconnect Theater system is turned
off.
Uconnect Theater Headphones
1 — Power ON/OFF Button
2 — Volume Control Wheel
3 — Channel Selector Button
644 MULTIMEDIA
To Next Page
Loading...
