1. Push and release the Stow ‘n Go Assist button. The front
seat cushion and seat back will move as necessary to a
location that will allow space for the second row Stow ‘n
Go seat movement.
2. Perform the second row Stow ‘n Go seat movement.
Refer to “Second Row Stow ‘n Go” for further informa-
tion.
3. Push and release the Stow ‘n Go Assist button a second
time. The front seat cushion and seat back will return to
the original starting location.
NOTE:
• To abort seat operation while seat is in motion, push the
Stow n’ Go Assist button, or push the front power seat
button to stop the seat movement. Pushing the Stow ‘n
Go Assist button again will return the front seat to the
original starting location.
• The Stow ‘n Go Assist system includes obstacle detec-
tion. When the system detects an obstacle, the seat will
stop, reverse direction, and return to the previous loca-
tion. A message will be displayed in the instrument
cluster indicating that an obstacle has been detected.
• If the front seat is already in a location that will allow
space for Stow ‘n Go of the second row seat, the front
seat will not move and a message will be displayed in
the instrument cluster.
• If calibration of the front seat is lost, the seat will
automatically re-calibrate when the Stow ‘n Go Assist
button is pushed. This may result in the seat cushion
moving forward and downward, before moving to the
location that will allow space for the second row Stow ‘n
Go seat movement.
Second Row Stow ’n Go
For Manual Seats: To stow the seat in the floor, move the
front seat all the way forward using the manual seat
adjustment bar. Move the seat back all the way forward
using the recliner handle located on the outboard side of
the cushion. Move the seat height to at least mid position
using the height adjuster handle in the outboard side of the
cushion.
3
GETTING TO KNOW YOUR VEHICLE 57
To Next Page
Loading...
