08
Door / Window Sensor
Door/window sensors are set to ‘Normal Zone’ by default and are ideal for protecting
entry/exit points, such as front/back doors and all windows. When the system is armed
and a sensor is triggered (magnet separated from the transmitter), a push notication
including the sensor name will automatically be sent to the registered users, and the
hub’s internal siren will sound immediately.
Transmitter
Magnet
LED Indicator
Tamper Switch
Blinks once Door/window opening detected
Blinks once per 3 seconds
Low battery indication, please change the
battery immediately
Tamper Switch
The tamper switch (small black lever underneath the back cover) will trigger an alarm
notication if an unauthorized attempt is made to remove the sensor from its installed
location.
To Next Page
Loading...
