04
Getting to Know Your System
This is a dual network system that utilizes both WiFi and Cellular. When the WiFi is in
use, the Cellular network will be in standby status (make sure the Cellular function is
activated from “Settings“- ”My Hub“-”Cellular “). In the event of AC power loss or WiFi
disconnection, the Cellular network will be implemented until power or WiFi connection is
reestablished.
All sensors are wirelessly linked to the hub. In the event of alarm activation, for example,
when a sensor is triggered, a push notication will automatically be sent and an alarm call
will be made to all registered users.
The system can be controlled and monitored both on-site by using the remote control
supplied or remotely from anywhere in the world with our free dedicated mobile
application.
The system can be expanded to include up to 50 wireless sensors and 10 remote
controls.
To Next Page
Loading...
Need help?
Power
Operating Environment
