Chuango H4 PLUS User Manual

28
Exit Delay Setting
Set a time delay and turn on/off a reminder tone. During the delay you can exit your
property without triggering an alarm.
Entry Delay Setting
You can install a door contact on your entrance door and change its zone mode to
Delay Zone, and then set a time delay. During the delay you can enter your property
(door contact is triggered) and disarm your system.(for zone setting, please refer to
page 25).
Time Settings
Synchronize Time
This setting enables you to automatically synchronize the time on your smartphone
with the time on your hub. This will ensure that you have the proper timestamp
included on any notications you receive from the hub.
When motion is detected, you will receive a push notication: (for example) Activity
detected by [PIR Sensor 01] at 08:20:00 GMT+2 Or Activity detected by [PIR Sensor
01] at 07:20:00 GMT+1 DST during Daylight Saving Time.
Date Format
This setting enables you to change the format of the date shown on your app.

Chuango H4 PLUS Specifications