07
Remote Control
Arm Button
LED Indicator
Disarm Button
SOS Button
Home Arm Button
Description of Indicator Light
Buttons System Status
All sensors will be armed. This mode is used when the property is
unoccupied.
All sensors will be disarmed.
Note: When the system is set to ‘Disarm’, sensors in 24-Hour Zone (ood
sensors, smoke detectors, etc) will remain active.
Sensors which are set to the Home Zone will be disarmed. All other
sensors will be armed. This mode allows for movements within the
property without triggering the Home Zone sensor(s), such as motion.
This will trigger an ‘emergency’ alert notication to registered users
regardless of the hub mode.
To Next Page
Loading...
