Chuango H4 PLUS User Manual

01
Things to Note before Getting Started
WiFi Network Connection
- One critical factor affecting the performance of your hub is the relative position/
distance of your home WiFi router and the hub. Place your hub in an open area (DO
NOT place it directly on the oor); the closer the hub is to the router, the stronger the
WiFi signal is.
- A slow network speed will also affect the performance of your hub. It is
recommended that you have an upload speed of at least 2Mbps or faster.
- Please be sure to connect your hub to WiFi using the 2.4GHz band as this provides
longer range, and better reception through walls. The hub does not support the
5GHz option. Selecting the 5GHz band instead of the 2.4GHz band is the most
common mistake when setting up the hub for the rst time.
For more information about your network quality, we recommend www.speedtest.net
or the speedtest app by Ookla.
Your WiFi Network and Password
- Check for your WiFi network’s name and password and write them down for easy
reference. The WiFi network name is commonly referred to as the SSID. The password
or security ID is normally the next line or two down from the WiFi/SSID network name.
Unless you’ve changed your network’s name and password, you can usually nd them
printed on the side of your router box, for example:
- WiFi/SSID Network Name: XXXX
- WiFi/SSID Network Password/Security Key: XXXXX
System Requirements
-iOS 8.0 or above with iPhone 5 or above
-Android 5.0 or above

Chuango H4 PLUS Specifications