21798-01-EN Rev. 04 Page 10
3
GENERAL SAFETY GUIDELINES
3.1 Introduction
This manual is intended to be a general installation guide for the SMARThatch
System. It is not intended to cover the installation details for every instance due
to the wide variety of scenarios that may be encountered. In all cases, local
safety and operating practices should take precedence over instructions
contained within this manual.
The installer must be appropriately trained and have read this manual prior to
installing and operating the SMARThatch System.
3.2 Safety Precautions
The following style of Warnings and Cautions are used throughout the manual to
draw attention to information regarding personnel safety and equipment care.
They are intended to supplement but not replace local or plant safety
procedures.
3.3 Definitions of Symbols
The following terms and symbols are used in this document and on the
SMARThatch where safety related issues occur.
3.3.1 General Warning or Caution
The Exclamation Symbol in Figure 4 appears in Warning and Caution tables
throughout this document. This symbol designates an area where personal
injury or damage to the equipment is possible.
Figure 4: General Warning or Caution Symbol
WARNING
Situation has the potential to cause bodily injury.
CAUTION
Situation has the potential to cause damage to property or
equipment.
To Next Page
Loading...