CiDRA SMART HATCH - Battery Charger; Web Portal; Telematics Modem LED

21798-01-EN Rev. 04 Page 32
3) Press the right-most button to open the backlight adjust menu.
4) Adjust the backlight colors as desired.
5) When finished, use the left/right arrow keys to highlight Save and Exit to
save changes and exit or Exit to discard any changes.
6) Press the right-most button to select and return the main display page.
5.4 Battery Charger
The SMARThatch System is supplied with two batteries. While one is being used
in the sensor the other should be stored in the battery charger so it is always
charged and ready for use.
To charge the battery, insert it in the charger terminal end first. The charge
indicator will blink indicating charging is taking place. When fully charged, the
charge indicator will show five solid bars. The battery can be stored in the
charger until ready for use.
5.5 Web Portal
The SMARThatch web portal provides real-time and archived data from the
SMARThatch system. The portal is designed to organize all trucks in your fleet
for quick user access. The web portal address is https://smarthatch.canect.io/
Training on setup and use of the web portal is provided separately by CiDRA
Concrete Customer Support.
5.6 Telematics Modem LED
For a breakdown of LED modes of operation for the telematics module Status,
GPS, and Cell refer to Appendix C.