CE318-T Photometer
User Operation Manual
Revision V4.10 October 2021
1
Dear Customer and users,
You have just purchased a Cimel photometer CE318-T and we would like to thank you.
The CE318-T is the most recent model of the well-known Cimel CE318 photometer.
This model is available and recommended to all users that intend to operate it in a
network, such as AERONET, CARSNET or SONET.
We have placed in this instrument all our passion and know-how so that it best meets
your needs. Innovation and performance: we designed it so that it is always easy to
use.
In the line of Cimel products, you will also find a wide range of remote sensing
instruments like the Cimel LiDAR CE710 and CE376 automatic aerosol LiDARs.
Of course, in an ongoing effort to satisfy your demands as best as possible concerning
our products, our after-sales service department is at your disposal and ready to listen
and answer to all your questions and suggestions (contact information at the end of
this booklet).
Please visit our website at www.cimel.fr : you will find all our products, as well as
additional and useful information.
As part of our commitment to constantly improve our products, we reserve the right to
make changes to their technical, functional and/or esthetical properties in line with their
technological development.
Caution: Before installing and using your instrument, please read carefully this
guide, which will help you to quickly familiarize yourself with its operation.
Please read also carefully the preventive maintenance that has to be done
weekly and yearly on the CE318-T.
To Next Page
Loading...
Need help?
General