Cimel CE318-T User Manual

CE318-T Photometer
User Operation Manual
Revision V4.10 October 2021
59
Note 1: This scenario is only used to check the polarizers.
MOONP (Polarized): The MOON Polarized scenario consists in measuring the Moon directly on
all polarizers with all filters except 937, 380 and 340nm.
Filters used and their sequence
Polarized
1020 nm SKY POL IR 0-1-2-3
1640i nm SKY POL IR 0-1-2-3
870 nm SKY POL IR 0-1-2-3
675 nm SKY POL VIS 0-1-2-3
440 nm SKY POL VIS 0-1-2-3
500 nm SKY POL VIS 0-1-2-3
4.2. Group of measurement scenarios
In auto mode, the photometer follows a schedule and automatically launches both
individual scenarios and group of measurement scenarios.
The following groups of scenarios are used:
Group name
Measures
Group A
3 SUN;
Group B
3 SUN; HYB; 3 SUN; HY
BP; 3 SUN; ALMU; 3 SUN; ALMUP
Group C
3 SUN; HYB; 3 SUN; HYBP; 3 SUN; ALMU; 3 SUN; ALMUP; 3 SUN; PP; 3 SUN; PPP
Group D
3 SUN; CRO; BLACK
Group E
3 SUN; ALMU; 3 SUN; ALMUP
Group F
3 SUN; SUNP; HYB; 3 SUN; HYBP; 3 SUN; ALMU; 3 SUN; ALMUP; 3 SUN; PP; 3 SUN; PPP
Group L
3 MOON; MOONP
Group P
3 SUN; SPR
Group S
3 SUN; ALMU; PP; BRDF; BLACK;
Note 1: In bold, measures that are done only with the polarized photometers. By
default, only HYBP is done. ALMUP and PPP have to be activated in PW on the CU.
Note 2: the group S is only done by the BRDF photometers.
Note 3: the group P is only done by SEAPRISM photometers.
Note 4: SUNP and MOONP have to be activated in PW on the CU.

Cimel CE318-T Specifications

General

Brand	Cimel
Model	CE318-T
Category	Measuring Instruments
Language	English