CIRCLE M7 - Page 18

Document: Service Manual
Description: Treadmill
Model: M7 LED
Page: 18 of 60
18
4.1.3. To control inverter by External control Key Pad:
4.1.3.1. Start / Stop / Fast / Slow
Start
Stop
Fast
Slow
Press PROG change to function setting at any
display mode, press ▲ ▼ to show F_001.
Press FUN/DATA enter the F_001 setting,
default value is【0】.
Press ▲ change value to【1】.
Press FUN/DATA to save and exit.