CIRCLE M7 - Drive Motor Replacement

Document: Service Manual
Description: Treadmill
Model: M7 LED
Page: 41 of 60
41
5.7. Drive Motor Replacement
STEP 1:
Remove the Motor Covers by
loosing 4 screws.
Remove the 4 screws on
Right & Left console mast
via screwdriver.
STEP 2:
Release 4 motor mounting
screws on motor plate via
M8 wrench.
STEP 3:
Release 2 adjustment
screws on the front and rear
motor boundary via two M14
wrenches.