STEP 16:
Put the motor cover back and secure 4
screws on motor cover to assemble.
Put the Right & Left console masts
back and secure 4 screws on motor
cover to assemble.
STEP 17:
To properly tension a new running belt,
using M6 torque wrench (45 kgf-cm)
and Allen wrench. Rotating the tension
bolts clockwise until heard the click of
torque wrench.
Start the treadmill and run it at 10
km/hr.
Counting adjusting belt until the belt
maintain centered and it does not
move to one side or another within 5
minutes.
To Next Page
Loading...