5�1�1�1�1�1�2�- Analog view�
The analogue display screen is shown in Figure 53
Figure 53:Instantaneous parameters, analog view(display 1 parameter)�
The menu in the lower area disappears after 3 seconds. Press the key to display the lower
area again.
The lower area menu options are:
>
>
<
<
varh
Back
Main
menu
Figure 54: Analog view menu�
Use the keys and to browse the different options.
To access the option selected press the key .
If you view the current, active power or apparent power, a second red coloured needle will
appear indicating the value of the maximum demand of the parameter being displayed.
If there is an alarm associated with the variable being displayed, the following will be shown:
The module with which the alarm is associated.
The associated output in the module.
64
CVM-A1000 - CVM-A1500
Instruction Manual
To Next Page
Loading...
