Cirrus DESIGN SR22 - Parking Brake Engaged Annunciation; Communications Failure

3A-20 P/N 13772-002
Section 3A Cirrus Design
Abnormal Procedures SR22
Parking Brake Engaged Annunciation
PARK BRAKE Caution
1. Parking Brake................................................................. RELEASE
2. Monitor CAS for BRAKE TEMP Caution. Stop aircraft and allow
the brakes to cool if necessary.
Amplification
Parking brake is set.
Communications Failure
1. Switches, Controls ............................................................. CHECK
2. Frequency ....................................................................... CHANGE
3. Circuit Breakers........................................................................ SET
4. Headset........................................................................... CHANGE
5. Hand Held Microphone ................................................. CONNECT
Amplification
If, after following the checklist procedure, communication is not
restored, proceed with FAR/AIM lost communications procedures.
• Note •
In the event of an audio panel power failure the audio panel
connects COM 1 to the pilot’s headset and speakers. Setting
the audio panel ‘Off’ will also connect COM 1 to the pilot’s
headsets and speakers.
PARK BRAKE
Reissue A