Cirrus DESIGN SR22 User Manual

Cirrus Design Section 7
SR22 Systems Description
P/N 13772-002 7-7P/N 13772-002 7-7
Empennage
The empennage consists of a horizontal stabilizer, a two-piece
elevator, a vertical fin and a rudder. All of the empennage components
are conventional spar (shear web), rib, and skin construction.
The horizontal stabilizer is a single composite structure from tip to tip.
The two-piece elevator, attached to the horizontal stabilizer, is
aluminum.
The vertical stabilizer is composite structure integral to the main
fuselage shell for smooth transfer of flight loads. The rudder is
aluminum and is attached to the vertical stabilizer rear shear web at
three hinge points.
Reissue A

Cirrus DESIGN SR22 Specifications

General

Brand	Cirrus
Model	DESIGN SR22
Category	Aircrafts
Language	English