EasyManua.ls Logo

Cirrus DESIGN SR22 - Powerplant Limitations

Cirrus DESIGN SR22
484 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-6 P/N 13772-002
Section 2 Cirrus Design
Limitations SR22
Powerplant Limitations
Engine
Teledyne Continental .............................................................. IO-550-N
Power Rating ....................................................... 310 hp @ 2700 RPM
Maximum RPM .....................................................................2700 RPM
Oil Temperature ............................................. 240°F (115°C) maximum
Minimum Oil Temperature for Takeoff...............................75 F (24 C)
Oil Pressure:
Minimum................................................................................ 10 psi
Maximum............................................................................. 100 psi
Approved Oils:
Engine Break-In: For first 25 hours of operation or until oil
consumption stabilizes use straight mineral oil conforming to MIL-
L-6082. If engine oil must be added to the factory installed oil, add
only MIL-L-6082 straight mineral oil.
After Engine Break-In: Use only oils conforming to Teledyne
Continental Specification MHS-24 (Ashless Dispersant Lubrication
Oil) or MHS-25 (Synthetic Lubrication Oil). Refer to Section 8,
Approved Oils.
All Temperatures ............................... 15W-50, 20W-50 or 20W-60
Above 40°F (4°C) .................................SAE 50, 20W50, or 20W60
Below 40°F (4°C) ................... SAE 30, 10W30, 15W50, or 20W50
Fuel Grade....................... Aviation Grade 100 LL (Blue) or 100 (green)
• Note •
Refer to Fuel Limits in this Section for operational limitations
regarding fuel and fuel storage.
Reissue A

Table of Contents

Related product manuals