EasyManua.ls Logo

Cirrus DESIGN SR22 - Landing Distance with Ice Accumulation

Cirrus DESIGN SR22
484 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
P/N 13772-134 35 of 48
Cirrus Design Section 9
SR22 / SR22T Supplements
Landing Distance with Ice Accumulation
• Note •
The following factors are to be applied to the computed landing distance for the noted
condition:
Normal landings will be completed with the flaps set to 50%.
Sloped Runway - Increase table distances by 27% of the ground roll distance for each
1% of downslope. Decrease table distances by 9% of the ground roll distance for
each 1% of upslope.
• Note •
The above corrections for runway slope are required to be included herein for
certification. They should be used with caution since published runway slope data is
usually the net slope from one end of the runway to the other. Many runways will have
portions of their length at greater or lesser slopes than the published slope, lengthening
(or shortening) landing ground run values estimated from the published slope as
described above.
For operation in outside air temperatures colder than this table provides, use coldest
data shown.
For operation in outside air temperatures warmer than this table provides, use
extreme caution.
Conditions:
Winds ............................................................................................................... Zero
Runway ........................................................................................ Dry, Level, Paved
Revision 05: 09-20-12

Table of Contents

Related product manuals