Cirrus DESIGN SR22 - Page 470

4 of 6 P/N 13772-143
Section 9 Cirrus Design
Supplements SR22 / SR22T
8. Reduce loads as required for flight conditions:
a. Air Conditioning and Fan ..................................................OFF
b. Convenience Outlet ................................Disconnect appliance
c. Audio Panel .......................................................................OFF
COM 1 will be supplied to pilot’s headset. Communication with
passengers through audio panel will not be available.
d. GPS/COM 2.......................................................................OFF
e. Fuel Pump .........................................................................OFF
except for landing and switching tanks.
f. Panel and Overhead Lights ...............................................OFF
g. Landing Light .....................................................................OFF
• WARNING •
Do not shed loads from Avionics Essential, Essential, or
Essential 2 Bus row.
h. Skywatch/TAWS Circuit Breaker...................................... PULL
i. Weather/Stmscpe Circuit Breaker ...................................PULL
j. MFD Circuit Breaker ........................................................ PULL
9. Assess flight conditions:
If in Visual Meteorological Conditions (VMC):
a. Pitot Heat...........................................................................OFF
b. Ice Protection.....................................................................OFF
If in Instrument Meteorological Conditions (IMC) or visible
moisture:
a. Pitot Heat............................................................................ ON
b. Ice Protection.......................................................ON, As Reqd
c. Strobe Lights .....................................................................OFF
10. Replan flight for a landing as soon as practical (within one hour) at
a landing field with visual minimums. Increase landing speed 10
KIAS for flaps up. Do not use landing lights.
Revision 02: 01-06-10