Cisco 1242AG - Aironet - Wireless Access Point - Chapter 3 Troubleshooting Autonomous Access Points

CHAPTER
3-1
Cisco Aironet 1240AG Series Access Point Hardware Installation Guide
OL-8371-05
3
Troubleshooting 1240AG Series Autonomous
Access Points
This chapter provides troubleshooting procedures for basic problems with the 1240AG series
autonomous access point (AIR-AP1242AG or AIR-AP1242G). For the most up-to-date, detailed
troubleshooting information, refer to the Cisco Technical Support and Documentation website at the
following URL:
http://www.cisco.com/en/US/products/hw/wireless/tsd_products_support_category_home.html
Sections in this chapter include:
• Checking the Lightweight Access Point LEDs, page 3-2
• Checking Basic Settings, page 3-3
• Low Power Condition, page 3-5
• Running the Carrier Busy Test, page 3-13
• Running the Ping Test, page 3-14
• Resetting to the Default Configuration, page 3-14
• Reloading the Access Point Image, page 3-16
• Obtaining the Access Point Image File, page 3-19
• Obtaining the TFTP Server Software, page 3-20