6-30
Cisco TelePresence System 3000
OL-14521-01
Chapter 6 Building the Table Assembly
Building the Table Assembly, Product ID CTS3K-M-TABLE-G2
Step 13 Attach the Microphones to the left, right, and center Table segments.
The center Microphone cable must be seated in the cable channel on the underside of the center Table
segment in order to properly install the Projector mounting bracket. You can use tape to secure it in place.
Note Steps for routing and connecting the microphone extension cables from the audio/video extension unit
to the microphones are in Chapter 8, “Routing Power and Signal Cables.”
Figure 6-26 Microphone Assembly
To Next Page
Loading...
