EasyManua.ls Logo

Cisco 3000 - Routing Power and Signal Cables; Parts List

Cisco 3000
248 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-2
Cisco TelePresence System 3000
OL-14521-01
Chapter 1 Overview
Chapter Organization
• Each element is described using one or more illustrations. The elements are:
–
Camera assembly - attaches to the center Display structure
–
Microphone assembly - attach to the three table segments
–
Table Leg Wiring assembly - wired for power and network connectivity
–
Projector assembly - attaches to the underside of the center table segment
–
Privacy Panel assembly - attach to the table segments
–
Codec assembly - attach to each Display structure
–
Speaker assembly - attach to the underside of the Display shelf
–
Projector Screen assembly - attaches to the underside of the Display shelf
–
Cisco IP Phone 7975G
–
Camera Target assembly - used for camera focus and alignment
Chapter 8, “Routing Power and Signal Cables”
• A series of illustrations are used to describe the routing and connection of all power and signal
cables.
• Illustrations show you the routing path to take for all cables.
• Illustrations showing cables terminating in a Codec include a close-up of the Codec.
• A pointer to the first-time setup information.
Chapter 9, “First-Time Setup”
• This chapter provides the procedures you perform to set up a Cisco TelePresence system for the first
time.
Chapter 10, “Use & Care Guide”
• This chapter provides information on maintaining several elements of the
Cisco TelePresence System 3000, including the tabletop and plasma displays.
Chapter 11, “Field-Replaceable Unit Guide”
• This chapter describes removal and replacement processes for various elements of the
Cisco TelePresence System 3000.
Parts List Sorted by Carton
• This appendix lists all parts included in the individual chapter parts lists, and sorts the list by carton.
Region- and Country-Specific Equipment
• This appendix lists the part numbers for all region- and country-specific equipment, including table
leg wiring and power cords.
Appendix B, “Cisco TelePresence System 3000 Pallet Dimensions and Description”
• This appendix list the size and number of pallets, and a description of the contents of the cartons.

Table of Contents