5-2
Cisco TelePresence System 3000
OL-14521-01
Chapter 5 Building the Display Shelf Assembly
Parts List
3
Assembly Screen Supports No part number 2 1 These brackets might also be
located inside of the assembly
cabinet.
These brackets are only
required if you use a Type 1
projector screen, part number
800-28681-xx. If your
installation uses the projector
screen with a product ID of
CTS3K-SCREEN and a part
number of 74-5416-xx, do not
install these brackets.
4 and
12
M8 x 30 mm screws 69-1706-xx 14 1
Key Part Description Part Number Qty Ctn Notes
Display Shelf, Product ID CTS3K-M-TABLE-G2
1
Display shelf section: left 74-5304-xx
95-9692-xx
1 44
2
Display shelf section: center 74-5306-xx
95-9694-xx
1 44
3
Display shelf section: right 74-5305-xx
95-9693-xx
1 44
4
Not used 74-5297-xx (right)
74-5298-xx (left)
1
1
5
Left accessory cabinet attachment bracket 700-23336-xx 1 18
6
Right accessory cabinet attachment bracket 700-23337-xx 1 18
7
Not used
8
Connecting plates 700-23345-xx 4 33
9
Speaker board brackets 6 36 Included with projector screen
kit.
10
Splines No part number 2 1
11
Draw bolts 51-4579-xx 6 1
12
and
13
M8 x 20 mm screws 48-2273-xx 1
14
M4 x 12 mm pan head screws 69-1878-xx
48-2426-xx
16 1 For connecting plates
Accessory Cabinet
1
Accessory Cabinet, Right 74-5297-xx
Kit # 69-1837-xx
1 37
2
Accessory Cabinet, Left 74-5298-xx
Kit #69-1838-xx
1 38
Key Part Description Part Number Qty Ctn Notes
To Next Page
Loading...
